When your table saw starts disturbing you and your neighbors with its annoying loudness, it’s time to look for fixes for this issue. The good news is, there are some things you can do if your table saw is making loud noises.
You can use rubber pads to decrease the noise vibration of your table saw. In addition, make sure to use a sharp blade and if you’re investing in a blade, get one that generates low noise. A few other adjustments will also help in this matter.
Let’s take a deeper look into the matter.
How To Make A Table Saw Quieter?
In this section, I’ll explain all the hacks you can try to make your table saw quieter. If you’re interested, you can also check my article on why is my table saw so loud. So, let’s get started without any further ado.
Insulate The Table Saw
To prevent the motor from vibrating the entire unit and causing more noise than usual, you can insulate the table saw. There are several products you will find online that can help you with this. For instance, a few rubber pads or anti-vibration isolation mounts will make a huge difference.
Investing in these products can prove to be one of the smartest things to do. Besides, they don’t cost a lot either. So, if you’re looking for an easy and inexpensive way to reduce vibration and noise, insulating the base of the table saw can be one way to do it.
Invest In A New Blade
Sometimes, the sole reason for a table saw to be loud is the blade. If your blade is dull, it will generate more noise when cutting any materials. That’s why it’s important that the blade you’re using is always sharp.
Also, if your blade has become blunt, investing in a blade will also benefit you in other ways. For instance, some table saw blades are made to be quieter than others. So, if you want to make your table saw quieter than it already is, buy a new and upgraded blade.
If you are looking for suggestions, No products found. is an excellent option to consider. It’s an advanced set of blades that ensures minimum vibration, which leads to less noise.
Get Your Table Saw Serviced
If the noise is something that wasn’t an issue before, there might be something wrong with the table saw. Sometimes when one or multiple parts of the table saw wears out over time, they can become louder than usual.
This can become clearer by comparing two table saws. If you operate a new table saw and compare it with an old one, you will notice how significant the difference is between their loudness.
So, in case your table saw is very old and making loud noises, it might be a good time to invest in a new one. If it’s a relatively new tool, get it serviced to see what seems to be the issue that’s causing the sudden change in noise.
Reconsider The Materials
You can’t cut all types of materials using your table saw. Go through the user manual and check what materials are off the limit. This may be different for each tool. You can also see the impact different materials have on the noise a table saw makes.
Cutting MDF boards will not generate the same amount of noise as wood will. So, different materials are responsible for making your table saw loud too. In this case, there’s not much that you can do.
Set The Blade Right
One mistake many people make that increases the noise of their table saws is to set the blade too high. Don’t always keep the blade to its highest settings. Adjust it according to the height of the material.
The blade should only be a bit higher than the material’s height. This will bring a drastic change to the noise level. You will notice it yourself after giving this a try.
Alter Your Cutting Method
If you’re feeding materials to the table saw very quickly, it can generate louder noises. So, be patient with the process. Slowly cut the materials. In addition, wait for the blade to reach the highest speed before entering the material to the blade.
Also, make sure that everything is in place before using your table saw. The insert plate, fence, etc., should all be place in perfect position if you want to reduce the noise to the minimum.
Use Earmuffs
Last but not least, always use earmuffs if you can’t make your table saw quieter. They’ll at least make the table saw quiet to you. The noise produced by a table saw can reach as high as 120 decibels, which is way above the safety level.
So, make sure that you’re using hearing protection when operating the unit. There are several options you can go for when protecting your ears. For instance, earmuffs are primary and straightforward option for ear protection.
If you want to upgrade this to a higher level, you can get ear buds with Bluetooth compatibility. This will not only allow you to reduce the table saw noise but also let you listen to your preferred music while you work.
Frequently Asked Questions
How many decibels is a table saw?
A table saw generates around 100 decibels. However, it can be more or less than that. The noise level can rise up to 120 decibels, which is a lot louder than the safe level.
Why is a table saw so loud?
Table saws are usually loud because of their motors, blades, and other parts. When the motor runs and the blade spins, it naturally produces a loud noise. The noise increases when you feed materials to the blade.
Final Words
You’re not entirely helpless in front of the noise that your table saw makes. As long as you know how to make a table saw quieter, you can certainly take a few steps. Nonetheless, it’s still recommended that you use hearing protection to protect your ear from the noise.
The methods will certainly dial down the noise but you can’t make a table saw entirely quiet.
